Large angle belt conveyor

1、 Application scope of DJ series products:
DJ series large angle wavy rib Belt conveyor It's a new type continuity Conveying equipment, which has large conveying capacity (same as others Conveyor Compared with the conventional belt conveyor, the conveying capacity is increased by 1.5-2 times; its versatility is strong (the basic parts are the same as the general-purpose belt conveyor), and the application range is wide (applicable to conveying gravel, limestone, coal, sand, clay, sintered sand powder, sawdust, grain and other materials; the unit weight is 500-2500kg / m3, It has the advantages of simple structure, convenient maintenance, small occupation space and saving investment (it can replace the conveyor Bucket elevator Therefore, it is widely used in coal, electric power, metallurgy, chemical industry, grain and other industries.
2. Working principle of DJ series products (sidewall belt conveyor): the structure of the edge belt conveyor is that the vertical "skirt" of rubber wave shape can be adhered on both sides of the flat rubber conveyor belt, and a certain strength and elastic diaphragm is adhered between the skirt edges to form a box shaped bucket, so that materials can be continuously transported in the bucket. The edge belt conveyor can be widely used in coal, grain, building materials, chemical industry, hydropower and metallurgy departments. It can transport various bulk materials with bulk specific gravity of 0.5-2.5t/m3 in the range of - 19 ℃ ~ + 40 ℃. For conveying materials with special requirements, such as high temperature, materials with acid, alkali, oil or organic solvent, special sidewall conveyor belt shall be used.
3、 DJ series products (sidewall belt conveyor) main features:
1. High inclination angle 2. Large yield 3. No spreading material 4. Flexible arrangement
4、 DJ series products (sidewall belt conveyor) main uses:
Corrugated edge conveyor belt: it plays a role of traction and bearing in the conveyor. The corrugated baffle, diaphragm and baseband form a gate for conveying materials, so as to realize large angle conveying.
2. Driving device: it is the power part of the conveyor. It is composed of Y series motor, ZJ shaft mounted reducer and wedge backstop.
3. Transmission drum: it is the main part of power transmission. The conveyor belt runs by the friction between it and the driving drum. This series of transmission rollers are divided into rubber surface and smooth surface. The rubber surface roller is used to increase the adhesion between the roller and the conveyor belt.
4. Turning drum: used to change the running direction of conveyor belt. The turning drum is used for the lower surface (non bearing surface) of the conveyor belt.
5. Belt pressing wheel: it is used to change the running direction of the conveyor belt, and the belt pressing wheel is used for the upper surface (bearing surface) of the conveyor belt.
6. Idler: the idler is used to support the conveyor belt and the materials on the belt stable function. This series has two types of upper parallel idler and lower flat idler.
The upper and lower supporting roller of the conveyor belt is used for supporting the side of the conveyor belt. Several groups of belt supporting rollers form an arc section to change the direction of the conveyor belt. The supporting roller is supported by cantilever.
8. Vertical roller: the vertical roller is used to limit the deviation of the conveyor belt and is installed on the upper and lower transition section frame. Each filter section rack is equipped with four, with two upper and two lower.
9. Beating wheel cleaning device: it is used to beat the back of the conveyor belt to shake off the materials stuck on the conveyor belt.
Take up device: its functions are: 1. Make the conveyor belt have enough tension to ensure that there is no slipping between the conveyor belt and the driving drum. 2. Limit the sag of the conveyor belt between the supports to make the conveyor run normally. This series adopts screw tension device.
11. Frame, head funnel, head shield, guide groove, intermediate frame, intermediate support leg, etc.: they play the role of supporting, dustproof and guiding respectively in the conveyor. There are three kinds of outriggers in this series: low type, Chinese type and high type. Only low type intermediate support legs are used for launching level section and inclined section, while different intermediate frame legs (low type, Chinese type and high type intermediate frame legs) are used for upper and lower level sections according to different head frames (low type, Chinese type and high type head frame).
Please contact us for details! 0373-3590809