When the SKF technology is used, the operating temperature should be too high
SKF import in application Bearing It is easy to appear the phenomenon of high temperature, which leads to the increase of friction force and the damage of equipment. Bring some unnecessary cost waste.
When we find that the equipment is damaged and the temperature is too high, we should first judge whether the operation is in accordance with the application regulations. On the premise of correct operation, the application should take necessary detection. First check the water pressure of the cooling water to see if it is normal, and then check whether the water flow of the cooling water and the pipeline system are normal. If the water pressure is too low, the filter may be blocked. This problem must be dealt with in time, otherwise it will cause very serious impact. We must dredge the filter to ensure that the SKF inlet bearing can be cooled properly when applied.
Then, the lubrication system of SKF imported bearing should be inspected to see whether the lubricating oil fails and whether there is oil leakage. If the lubricating oil is found to be deteriorated, it should be replaced with a new one immediately. If there is oil leakage in the sealant pad, replace it immediately.
Only quickly and effectively find out the reason why the operating temperature of SKF inlet bearing is too high and remove it. The imported SKF Bearing can be guaranteed stable High efficiency The operation of.
